Etelux reminds you that in addition to the typical inspection of the glove box, the day by day maintenance work of the glovebox is also essential













one. Right before and just after each work, very first clear the surroundings to make the ground dry and clear. Then clean up the tools, such as the inner and outer surfaces of the glove box, the observation method, the function surface area, and so on., to be free of debris and clean.













2. Cautiously file the h2o, oxygen content material, and gas intake of the devices in the glove box every day to prevent inadequate gasoline pressure and bring about the gear to end jogging.













three. Pay notice to the quantity of fuel in the functioning gas cylinder at any time and change it in time.













four. In circumstance of power failure, push the "vacuum pump" button on the panel to make the vacuum pump run just after electricity on




















5. Be aware: Soon after power on, if there is a challenge that it can't commence, the chance is that the vacuum pump power cable is loosely linked. The 2nd cause is that the vacuum pump’s individual change is not turned on




















six. When you want to set the sample into the glove box, use a tiny transition chamber as a great deal as probable. Ahead of opening the transition doorway, pay out notice to no matter whether the pressure gauge pointer on the valve cavity is at the zero situation. If it is, you can open up it immediately if not, you will need to convert the switch less than the valve cavity to the "filling" placement to permit the gasoline enter the glove box transition compartment, and then switch the change again to the intermediate situation, then you can open up the changeover compartment Place the sample in the doorway, and then shut the door. When positioning samples, be very careful not to contact the internal wall of the changeover chamber with your arms, don gloves to pick and spot the sample



























Executing these regimen upkeep duties can lessen the reduction rate of the glove box, prolong the service life of the glove box, and also decrease the prevalence of accidents
There are no comments on this page.
Valid XHTML :: Valid CSS: :: Powered by WikkaWiki